Wednesday, April 24, 2013

Old Iron



I love old machinery--doesn't matter what it is--planes, trains, automobiles, or ancient firearms... Having worked in and around machine shops a good part of my life, I can appreciate what it took to make these things with the tools available at the time--no computers, no automated machine tools, not even a calculator.  All the math was done with slide rules and "stubby pencil".

On one of our trips to Southeastern Utah, we stopped in Monticello. The Pioneer Museum there had a display of old farm tractors from the surrounding area.  I was told that most of the tractors came in there on their own power--quite a feat since some of them are close to 80 years old.

Note that this is not a permanent display... they were brought in by private owners and removed again after a couple weeks... I just was at the right place at the right time.

Anyway, here are some of them... I have an account on Pinterest, and will post others there (as soon as I learn how to do so...).

 BTW, if any of you know the exact model of these machines, leave a comment.  I had written down the serial numbers, etc. but have lost my notes...





This old John Deere has seen better days… but then, I would guess it was built in the 30’s so it's close to 80 years old—based on the spoked wheels.  Note also that someone put wheels off a military 2 ½ ton Truck (Deuce and a Half) on the front.  The right tire is even the military universal tread. A close look at the left front wheel in the 2nd picture will show spokes that were used to attach the new wheel to the old hub…



 
















-----------------------------------------------------------------------------------------------------------------------------------------------



A Fordson Model B.  When Henry Ford wanted to start building his own tractors, the Ford name was tied up due to an earlier, failed partnership, so, he named them “Fordsons” instead.  I’ve generally seen these with steel wheels… this one has hard rubber tires, with duals in the rear… not sure what it was used for but my guess is as an orchard tractor.




-----------------------------------------------------------------------------------------------------------------------------------------------





Here R to L, we have 3 crawlers-- a CAT D4?  An International (IHC) TD-9?  and a John Deere that I don't know the model of. Crawler tractors were used to drag large harrows or gang plows to work dry farms.  Their low ground pressure allowed them to go places a wheeled tractor couldn't. The JD crawlers actually used a modified wheel tractor chassis--mounting track frames on it instead of front and rear axles.



If you look carefully on the engine of the orange IHC crawler, you'll see that it has sparkplugs--even though it's a diesel engine.

The old IHC UD and ND series engines were interesting--though they were diesels, they also had spark plugs, a carburetor, and a magneto. I've seen them in various sizes and 4 and 6 cylinder versions powering everything from generators and motor graders to huge bulldozers. I overhauled a 4 cylinder model out of a Galion Motorgrader while in college back in 1982.

There was a third valve in the cylinder head that just opened to an empty pocket--it didn't go anywhere.  What it did do was lower the compression. by putting more space above the piston. This was one of the first "Hybrid" engines.  It could run on gas, or diesel (if it was warm).

To start the engine, you pulled a lever to open the valve, which also opened a valve to a small gas tank.  When you cranked the engine, gasoline went through the carb into the engine and was ignited by the magneto and plugs.  The lowered compression ration allowed it to run without "knocking".  After the engine warmed up, you shut off the lever while simultaneously pulling the throttle to start diesel flowing to the injectors. Apparently this took a bit of coordination, but it must have worked pretty well because it was used for many years. 

This system was unique to International.  Cat used a "pony engine"--a small, inline 2 cylinder gas engine connected to the diesel with a clutch.  You started the pony engine... which also helped to warm the coolant in the diesel (they shared the same cooling system), then engaged a clutch to turn the diesel over... quite an undertaking but it would start it up... John Deere used a similar system on their larger engines, but it was a "V-2"

Straight electric start eventually replaced these older systems, but even while working at a used machinery dealer from 1997 to 2003, we'd still have machines come in with pony engines, or, in the case of the IHCs, a diesel engine with spark plugs.

So, you can win a bet with someone if they say diesels don't have sparkplugs. 

-------------------------------------------------------------------------------------------------------------------------------------------


A nicely restored Farmall (IHC) Cub. 



This tractor was built from 1947 to 1981 under the McCormick-Deering, Farmall, or International names--one of the longest manufacturing runs for any tractor.  While the little 4 cylinder flathead engine only put out about 10 hp, it had a long stroke, so it had plenty of torque.  This was the original garden tractor--you could plow with it, cut weeds, and mow the lawn.  IHC also built a "Lo-Boy" version which was very popular in landscaping, mowing golf courses, etc.








          1977 International Cub Lo-Boy



The Cub and some other IHC tractors had an unusual feature on them called "Cultivision:.  The engine, transmission and rear axle were all connected together as one unit--no external frame was needed.--as is common with most tractors. However, in the Cultivision series, the center line of the tractor was offset to the left, while the operator's seat was to the right. Notice the steering shaft goes down the right side of the tractor. This allowed the operator to look directly at the furrow or line of crops he was working on.  It made the tractor look a little odd and off-balanced, but it was a good system.

My father-in-law had a IHC Cub with plows and a sickle bar mower.  He had bought 5 acres in rural Davis County, Utah, and used it around the "homestead".  He planted a garden, fruit trees, etc. but the weeds from the former pasture sprang up quite high.  We were living with them at the time while I was in school, so one day I decided to help out by mowing weeds.  Little did I know that I also mowed down several of his young sapling fruit trees--the weeds were so tall I couldn't see them... ooops!!!




This shows the front view of the Farmall Cub, along with a Sears SS16 garden tractor in the foreground.  The Sears tractors were built in the 1970s to the early 80s.  They were a development of the older Sears Suburban Series.  The GT series followed the SS models and were the last Sears tractors built by Roper before they changed the name to Craftsman and Sears started buying them from American Yard Products (AYP). The SS and GT series tractors had Onan flat twin cylinders in 16 or 18 hp... quite the brute for a small tractor!! I have both models and work them hard.
--------------------------------------------------------------------------------------------------------------------------------------------



Here we have R to L, a Case VAC?, an Allis Chalmers, and a John Deere.  Do you notice anything unusual about the John Deere?

Here's another picture... Give up???




















Oh, alright!!!! One last picture... anyone familiar with the old John Deere "Johnny Popper" flat twin engine will know immediately. 


     

















This John Deere has had a Chevrolet Small Block V-8 "grafted" on to it!!


The V-8 is sitting above the area where the two, flat-lying, side-by-side cylinders of the factory engine would normally be. A large flywheel, now replaced by the larger pulley on the lower right side of the picture, was attached directly to the crankshaft.  Whoever installed the Chevy did a great job... even if it's V-belt drive!  Notice that the engine is painted John Deere yellow and green...

 Although a 4-stroke engine, the spark plugs of the John Deere "Johnny Popper" both fired on the same revolution. It had a distinctive sound when running, hence the nickname... the cylinders were quite large, but it was the huge flywheel on the side of it which made the tractor a lugging fool.  Many tractor pulls were won by them in the 40s and early 50s.

As a boy in the 60s, one of our neighbors used a John Deere Model B to drive an irrigation pump.  His farm was a mile down the road, but on a warm summer evening with the windows open, that old tractor "sang" me to sleep many a time.

Here's a picture of another John Deere with the "Johnny Popper" engine. Notice the sparkplug and wire of the right hand cylinder just above the frame rail.  The large pipe is to bring coolant from the engine to the radiator.  The large flat pulley was used to power belt-driven machinery such as pumps, threshers, etc.





If you're interested in old tractors--restoring them, or getting more information, check out these websites:

Tractor Data  A good site for basic information about just about every tractor ever made--agricultural, industrial, and even the small garden/lawnmower tractors. 

Yesterday's Tractor  A good site for parts, manuals, and a great forum as well.

Smokstak  This site deals with antique engines of all types, but also has a well-supported forum on tractors and other machinery...

Garden Tractor Talk  I love this website!!!  It deals with all types of garden tractors, antique and modern--one, two, three, or four-wheeled.  It has .pdf copies of many manuals, and a diverse forum dealing with specific models... For example, have you ever seen a Roof "Palomino".  It's a lawnmower built to look like a Jeep.  How about an old David Bradley or Bolens walk behind tractor, or a Pennsylvania Panzer?  They're all located here.  Want to convert your Garden Tractor to diesel power??? you can find step-by-step instructions here as well... There's also a classifieds section to find those (increasingly) hard to find parts.

You can browse for free, but I encourage you to join as you can then post to the forums, as well as contribute articles, etc.

Well, that's all for now, but I'll post more later when I get a chance.

Smitty

26 comments:

  1. Wow that's some really interesting tidbits!

    ReplyDelete
  2. Wow that's some really interesting tidbits!

    ReplyDelete
  3. I sold Industrial, Construction and Mining equipment in Utah, Wyoming and Idaho for a couple of decades. Spent a good deal of time on the road, and I especially loved coming upon older and retired machines and then checking them over.

    It was nice to be alone and take 15 minutes to walk around and crawl over history as it was preserved in the varieties of the equipment I had the satisfaction to inspect. It was almost like we were old friends of sorts as I connected with this equipment.

    Jack

    ReplyDelete
  4. What trip was this?

    ReplyDelete
  5. cheap hermes handbags for cheap
    Everyone loves it when folks get together and share ideas.

    Great website, continue the good work!

    ReplyDelete
  6. Appreciating the time and energy you put into your blog and detailed information you offer.

    It's awesome to come across a blog every once in a while that isn't the
    same out of date rehashed information. Fantastic read!
    I've saved your site and I'm including your RSS
    feeds to my Google account.

    My website: Coffee Pure Supplements

    ReplyDelete
  7. Fine way of describing, and nice post to take data concerning my presentation focus, which i am going to deliver in academy.


    Feel free to visit my webpage http://alphamaxs.com/

    ReplyDelete
  8. I'm impressed, I have to admit. Rarely do I encounter a
    blog that's equally educative and engaging, and let me tell you,
    you've hit the nail on the head. The issue is something that not enough men and women are speaking intelligently about.
    I am very happy that I came across this in my hunt
    for something regarding this.

    Also visit my weblog Superior Velvet review

    ReplyDelete
  9. Ridiculous quest there. What happened after? Good luck!


    Here is my web site ... online pharmacy

    ReplyDelete
  10. Undeniably believe that which you said. Your
    favorite justification appeared to be on the internet the simplest
    thing to be aware of. I say to you, I definitely
    get irked while people consider worries that they plainly don't know about.

    You managed to hit the nail upon the top and defined out the whole thing without
    having side-effects , people can take a signal.
    Will likely be back to get more. Thanks

    Here is my web blog - how to get money online

    ReplyDelete
  11. Good site you have here.. It's difficult to find excellent writing like
    yours nowadays. I seriously appreciate individuals
    like you! Take care!!

    Feel free to visit my web blog: website

    ReplyDelete
  12. Awesome issues here. I'm very happy to look
    your article. Thanks so much and I am having a look
    forward to touch you. Will you kindly drop me a
    e-mail?

    My page; reviews for green coffee bean

    ReplyDelete
  13. Hi, i think that i saw you visited my site
    thus i came to “return the favor”.I am trying to
    find things to improve my site!I suppose its
    ok to use some of your ideas!!

    My web site ... skin product review

    ReplyDelete
  14. Good web site you've got here.. It's hard to find high-quality writing
    like yours these days. I really appreciate people
    like you! Take care!!

    Also visit my web blog ... eva mendes

    ReplyDelete
  15. Hey there! This is my first visit to your blog! We are a collection of volunteers and
    startig a new project in a community in the same niche. Your blog provided us useful information to
    work on. You have don a outstanding job!

    my homepage Clash of Clans Hack

    ReplyDelete
  16. Right now it seems like Drupal is the preferred blogging platform available right now.

    (from what I've read) Is that what you are using on your
    blog?

    My webpage: onkyo nr929

    ReplyDelete
  17. I was recommended this website by my cousin. I'm
    not sure whether this post is written by him as no one else know such detailed about my problem.
    You are amazing! Thanks!

    Review my site; music marketing press promotion distribution and retail

    ReplyDelete
  18. This paragraph will assist the internet visitors for creating new weblog or even a blog from
    start to end.

    Feel free to surf to my web page - best food dehydrator reviews

    ReplyDelete
  19. We're a bunch of volunteers and opening a brand new
    scheme in our community. Your site offered us with helpful info to
    work on. You have performed an impressive activity
    and our whole group will probably be thankful to you.


    My web-site; house extensions builder

    ReplyDelete
  20. Thanks for one's marvelous posting! I seriously enjoyed reading it, you can be a great author.
    I will ensure that I bookmark your blog and definitely will come back at
    some point. I want to encourage continue your great posts,
    have a nice morning!

    Feel free to surf to my web site :: vigfx review

    ReplyDelete
  21. The NBA is inundated with players that perform specific roles for their team.
    That is why there is such a demand for a Mac - Book Replacement
    screen and i - Pad Parts nowadays. Several regular enemy-types
    and dozens of traps usually surround them.

    my webpage: mini warriors hack, http://www.sivuland.biz/,

    ReplyDelete
  22. The NBA is inundated with players that perform specific roles for their team.
    There's no actual training stage or anything of the sort, just a screen where
    you spend a certain amount of cash on experience and team points -- the latter is spent on skills for your mobile
    suit -- which is immensely helpful since players will earn a ton of cash upon completing stages.
    During half-time a summary of the Chargers training camp event on board the USS Ronald Reagan will occur followed by a performance by the 3rd
    MAW Band from MCAS Miramar.

    Look into my web page - mini warriors hack (youulike.com)

    ReplyDelete
  23. To get these parts, it history of automobiles seems almost everything iss
    bought or sold over the Internet How to Obtain Money for Junk Car?
    Any good auto mechanic, that can in addition be
    all you need in stock. If the interest rate
    of financing a loan. With a starting price of $90, it has evolved to become one too.

    One more reward is that the car dealers as associates.


    Feel freee to surf to my weblog serwisy samochodowe ()

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. This comment has been removed by the author.

    ReplyDelete

COMMENTS???